Tiling
A-Z Categories
-
Classi Seal Roll 3.2m - CS03.2
Ref: PTIA353
- Flexible waterproof upstand
- Available sizes: 2m, 2.5m, 3.2m & 4m rolls
- Professional, patented waterproofing solution
-
Classi Seal Roll 4m - CS04.0
Ref: PTIA354
- Flexible waterproof upstand
- Available sizes: 2m, 2.5m, 3.2m & 4m rolls
- Professional, patented waterproofing solution
-
Classi Plus Roll 4m - CP04.0
Ref: PTIA364
- Flexible waterproof upstand - 70mm taller than Classi Seal
- Available sizes: 2m, 2.5m, 3.2m & 4m rolls
- Professional, patented waterproofing solution
-
Classi Plus Roll 3.2m - CP03.2
Ref: PTIA363
- Flexible waterproof upstand - 70mm taller than Classi Seal
- Available sizes: 2m, 2.5m, 3.2m & 4m rolls
- Professional, patented waterproofing solution
-
Sealux AquaStrap Up-Stand Seal Roll 3.2m
Ref: PTIA305
- The primary sealing material in this two part sealing system is the silicone which is typically applied into the joint between a wall tile and adjacent ledge.
- The secondary sealing materials are the up-stand strip and adhesive strip. The up-stand strip forms the third inner side of this three sided sealant joint.
- The up-stand strip and butyl adhesive are polymeric components strategically layered with sealant isolating materials to prevent contact with reactive silicones.
-
Sealux AquaStrap Up-Stand Seal Roll 4.0m
Ref: PTIA307
- The primary sealing material in this two part sealing system is the silicone which is typically applied into the joint between a wall tile and adjacent ledge.
- The secondary sealing materials are the up-stand strip and adhesive strip. The up-stand strip forms the third inner side of this three sided sealant joint.
- The up-stand strip and butyl adhesive are polymeric components strategically layered with sealant isolating materials to prevent contact with reactive silicones.
-
Classi Plus Roll 2.5m - CP02.5
Ref: PTIA362
- Flexible waterproof upstand - 70mm taller than Classi Seal
- Available sizes: 2m, 2.5m, 3.2m & 4m rolls
- Professional, patented waterproofing solution
-
Sealux AquaStrap Up-Stand Seal Roll 3.4m
Ref: PTIA306
- The primary sealing material in this two part sealing system is the silicone which is typically applied into the joint between a wall tile and adjacent ledge.
- The secondary sealing materials are the up-stand strip and adhesive strip. The up-stand strip forms the third inner side of this three sided sealant joint.
- The up-stand strip and butyl adhesive are polymeric components strategically layered with sealant isolating materials to prevent contact with reactive silicones.