Azpects EASYJoint Paving Jointing Compound Stone Grey 12.5kg

In stock
REF
BCHE291
  • Available colours: EASYJoint stone greymushroombasaltbuff sand and jet black
  • All-weather jointing compound: suitable for use in dry and wet weather
  • Quick and easy application: just add water and brush in
  • EASYJoint coverage: calculator
  • Keep a joint gap of 3mm wide and 20mm deep
  • Firm enough to walk on within 24 hours (in dry and warm conditions)
  • Cures within a few days
  • Strike or tool for an extra smooth finish
  • Safe to use with natural stone and concrete paving
  • Seal sensitive paving before use (eg Black Limestone, Granite, Slate, and Polished Sandstone)
  • No waste: unused product can be stored covered by a minimum of 2" (50mm) water
  • Environmentally friendly product
  • Colour guide
  • Manufactured in the UK
  • View more jointing compounds here
£29.84 £24.87
Share on Social Media
  • Available colours: EASYJoint stone greymushroombasaltbuff sand and jet black
  • All-weather jointing compound: suitable for use in dry and wet weather
  • Quick and easy application: just add water and brush in
  • EASYJoint coverage: calculator
  • Keep a joint gap of 3mm wide and 20mm deep
  • Firm enough to walk on within 24 hours (in dry and warm conditions)
  • Cures within a few days
  • Strike or tool for an extra smooth finish
  • Safe to use with natural stone and concrete paving
  • Seal sensitive paving before use (eg Black Limestone, Granite, Slate, and Polished Sandstone)
  • No waste: unused product can be stored covered by a minimum of 2" (50mm) water
  • Environmentally friendly product
  • Colour guide
  • Manufactured in the UK
  • View more jointing compounds here

Azpects EASYJoint jointing compound is up to 20 times faster than standard jointing methods, suitable for application in all weather conditions all year round. The brush in jointing compound is easy to use and reduces strain on the knees and back. The perfect alternative to grout and suitable for DIY and professionals. No stains and mark-free when used correctly.

Application:

  • Wet the paving: use a hose to saturate the area
  • The paving must remain wet throughout
  • Seal any sensitive paving before laying
  • Work quickly with a team of two: one sweeping and the other using the hose
  • Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints
  • Top up: ensure all joints are even and top up any low areas
  • Wash and clean: gently spray water across the surface to wash off any residue
  • When the water has drained away, use "flicking" motion with a clean, soft hand brush to remove any loose grains
  • Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool

For best results:

  • Use on a free draining site
  • Joints must be fully exposed to air to cure
  • Ensure the project has a suitable "fall" to allow surface water to drain away