We use cookies to make your experience better. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience. To comply with the new e-Privacy directive we need to ask for your consent to set non-essential cookies. If you do not give permission you may continue to use this site and only essential cookies will be set. Learn more.
Salamander TapBoost Pressure Booster for Taps - Water Mains Fed - Single Outlet
In stock
REF
PESH404
Free Delivery with this Product
- Boosts water flow to a single outlet to between 7-11 litres per minute, depending on the incoming flow
- Easy to install, with a compact and inline design
- Very quiet in operation, operating at just 34.2dBA
- Suitable for either hot or cold tap to improve waterflow
- Suitable for mains or gravity-fed systems
- Has a built-in flow limiter to prevent over-pressurisation
- Can be used with a variety of appliances, including taps, showers, toilets, dishwashers and washing machines
- Has a self-priming feature, so it can be used with both mains and gravity-fed systems
- Comes with a complete set of installation instructions
- Easy to install, so you can get it up and running quickly and easily
- Backed by a 2 year warranty
- Provides peace of mind knowing that your water pressure will be consistent, even during peak usage times
- Helps to extend the life of your appliances by reducing the amount of wear and tear caused by low water pressure
- Can save you money on your water bill by reducing the amount of water you use
- Is a great investment for any home or business
£114.00
£95.00
- Boosts water flow to a single outlet to between 7-11 litres per minute, depending on the incoming flow
- Easy to install, with a compact and inline design
- Very quiet in operation, operating at just 34.2dBA
- Suitable for either hot or cold tap to improve waterflow
- Suitable for mains or gravity-fed systems
- Has a built-in flow limiter to prevent over-pressurisation
- Can be used with a variety of appliances, including taps, showers, toilets, dishwashers and washing machines
- Has a self-priming feature, so it can be used with both mains and gravity-fed systems
- Comes with a complete set of installation instructions
- Easy to install, so you can get it up and running quickly and easily
- Backed by a 2 year warranty
- Provides peace of mind knowing that your water pressure will be consistent, even during peak usage times
- Helps to extend the life of your appliances by reducing the amount of wear and tear caused by low water pressure
- Can save you money on your water bill by reducing the amount of water you use
- Is a great investment for any home or business
Salamander TapBoost is an intelligent domestic inline clean water pump designed to improve the flow to a single outlet/point suffering from low water pressure. TapBoost increases the water flow of a single outlet to 7 – 11 litres per minute (l/pm), depending on incoming flow. Suitable for use with mains water and tank-fed water systems, with water up to 65°C. Operates at 12V DC, supplied via a 240V AC power supply unit.
Technical:
- ½” BSP Male connection outlet/15mm compression fitting (inlet)
- Minimum flow required for activation: 1.2 l/pm
- Maximum inlet water pressure 10 Bar/1000 kPa
- Minimum flow rate for activation 1.2 l/pm
- Backflow protection Integrated non-return valve
- Pump inlet connection 15mm compression
- Pump outlet connection 1/2” male BSP
- Pump enclosure protection IPX4
- Motor duty rating Continuous
- Boosted output flow rate 7 - 11 l/pm (varies depending on incoming flow rate)
- Water temperature 4°C - 65°C
- Maximum head 5m (0.5 bar)
- Full load current 1.5 A
- Maximum pump wattage 18 W
For best operation:
- Must be a natural flow rate from the outlet of at least 1.2 litres per minute (l/pm)
- When the natural flow rate is at 1.2 l/pm TapBoost will increase the flow up to 7 l/pm
- If the natural flow rate is greater than 1.2 l/pm TapBoost will increase outlet flow rate up to a maximum of 11 l/pm
- TapBoost constantly monitors the flow rate and will react accordingly
- If the flow rate reaches 11 l/pm, TapBoost will enter idle mode so as not to pump more than 12 l/pm to comply with the Water Supply (Water Fittings) Regulations 1999.
Specification
Maximum inlet water pressure | 10 Bar/1000 kPa |
---|---|
Minimum flow rate for activation | 1.2 lpm |
Backflow protection | Integrated non-return valve |
Pump inlet connection | 15mm compression |
Pump outlet connection | 1/2” male BSP |
Pump enclosure protection | IPX4 |
Pump weight | 0.6 Kg |
Motor duty rating | Continuous |
Boosted output flow rate | 7 - 11 lpm (varies depending on incoming flow rate) |
Water temperature | 4°C - 60°C |
Maximum head | 5m (0.5 bar) |
Full load current | 1.5 A |
Maximum pump wattage | 18 W |
Pump dimensions (mm) | 95mm(L) x 53mm(W) x 124mm(H) |