We use cookies to make your experience better. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience. To comply with the new e-Privacy directive we need to ask for your consent to set non-essential cookies. If you do not give permission you may continue to use this site and only essential cookies will be set. Learn more.
Nexus ProJoint Porcelain Paving Primer 20kg
In stock
REF
BCHE324
Free Delivery with this Product
- Single coat application to the underside of paving
- Suitable to be laid on sand and cement bedding
- Simple to use
- Excellent adhesion
- Apply with brush or roller
- Suitable for application in low temperatures
- Internal and external use
- Two x 10kg bags contained within the lidded mixing tub
- 20kg tub covers 27.5m² (depending on application and paving porosity)
£36.98
£30.82
- Single coat application to the underside of paving
- Suitable to be laid on sand and cement bedding
- Simple to use
- Excellent adhesion
- Apply with brush or roller
- Suitable for application in low temperatures
- Internal and external use
- Two x 10kg bags contained within the lidded mixing tub
- 20kg tub covers 27.5m² (depending on application and paving porosity)
ProJoint™ Porcelain™ Primer is a flexible primer with an ultra-high polymer and fibre formula. Single coat fast application for adhesion and control suction on porcelain, concrete, ceramic tiles, paving slabs, or setts.
Application:
- Mix with 2.8 litres of cold clean water per 10kg bag
- Add the water to the bucket
- Add powder slowly and mix using a plasterer’s whisk
- Mix for 2 minutes and then leave to stand for 2 minutes
- Re-mix for a further 2 minutes
- Apply a thorough and even coat of the primer as a slurry using a masonry brush or roller to the underside of the paving
- Mixed slurry lasts for approximately 60 minutes at 20°C
- Primer should be completely dry before laying the paving
- Dry within 10 to 15 minutes