Unilin Xtratherm Polyiso Partial Fill Cavity Wall Insulation Board 1200mm x 450mm x 50mm

In stock
REF
BINS631

Spend £100 for free delivery from your local branch - learn more

This is a Local Delivery Only Product More info

  • Pack area: 0.54m2
  • Thermal conductivity of 0.022 W/m.K
  • Polyisocyanurate foam core
  • Compressive strength: >120 (kPa)
  • Low emissivity foil front
  • No exposure restrictions
  • Tough tongue and groove jointing
  • BBA certified - certificate 08/4613
  • Clear cavity maintained
  • Reduced thermal bridging
  • Lightweight making it easy to install
  • Measurements: 1200mm x 450mm x 50mm (L x W x T)
  • MPN: XT/CW/050/BD/SP01
£7.44 £6.20
Share on Social Media
  • Pack area: 0.54m2
  • Thermal conductivity of 0.022 W/m.K
  • Polyisocyanurate foam core
  • Compressive strength: >120 (kPa)
  • Low emissivity foil front
  • No exposure restrictions
  • Tough tongue and groove jointing
  • BBA certified - certificate 08/4613
  • Clear cavity maintained
  • Reduced thermal bridging
  • Lightweight making it easy to install
  • Measurements: 1200mm x 450mm x 50mm (L x W x T)
  • MPN: XT/CW/050/BD/SP01

The Unilin Partial Fill Cavity Wall Insulation Board is for use in conventional masonry walls and features a strong tongue and groove jointing which creates constant insulation throughout the structure and minimal chances of thermal bridging. The insulation board is made from a firm Polyisocyanurate foam which makes it lightweight for easy installation, while the low emissivity foil facing enhances the thermal performance of the building.

Unilin Insulation products are durable and stable due to the use of high-quality products in the manufacturing process. They are also rot proof and provide no food value to pests or vermin, and if installed to the correct specifications, the insulation will remain effective for the lifetime of the building.