Ruberoid Self-Adhesive SA Bitumen Primer 5L

In stock
REF
BWAD175
  • Coverage: 4 - 8 m2/litre
  • Solvent-based primer
  • Drying Time: 5 to 30 mins (depending on ambient conditions)
  • Instant grab
  • Roller applied for simple application
  • High tack properties
  • Strong permanent polymeric bond
£74.48 £62.07
Share on Social Media
  • Coverage: 4 - 8 m2/litre
  • Solvent-based primer
  • Drying Time: 5 to 30 mins (depending on ambient conditions)
  • Instant grab
  • Roller applied for simple application
  • High tack properties
  • Strong permanent polymeric bond
  • Ensure the substrate is structurally sound, free of surface laitance, oils, grease, dirt, moss, lichen, and loose material.

  • The surface should be smooth and free from sharp projections and loose debris, and any material which would hinder adhesion.

  • Icopal SA Primer is ready for use and should not be diluted.

  • Remove the lid and stir the primer thoroughly before and during use.

  • Using a solvent-resistant brush or roller, apply Icopal SA Primer at a rate of 0.12-0.25 L/m², depending on the type and absorbency of the substrate.