We use cookies to make your experience better. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience. To comply with the new e-Privacy directive we need to ask for your consent to set non-essential cookies. If you do not give permission you may continue to use this site and only essential cookies will be set. Learn more.
Manthorpe Roll-Out Dry Ridge Tile Roofing System Black 3m - GDRR-3M-BL
- Quick and easy to fix, with no special tool requirements
- Compatible with a variety of roof and ridge tiles
- Kit contents: 1 vent roll, 5 batten support brackets, 7 ridge unions
- Does not require mortar
- Can be installed in all weathers
- Provides 5,000mm²/m of ventilation into the roof space
- Single person installation
- Fully compliant to the requirements of BS 8612
- One box supplies enough components for a 3m ridge length
- Size: 300mm x 3000mm
- Colour: Black
- MPN: GDRR-3M-BL
- Quick and easy to fix, with no special tool requirements
- Compatible with a variety of roof and ridge tiles
- Kit contents: 1 vent roll, 5 batten support brackets, 7 ridge unions
- Does not require mortar
- Can be installed in all weathers
- Provides 5,000mm²/m of ventilation into the roof space
- Single person installation
- Fully compliant to the requirements of BS 8612
- One box supplies enough components for a 3m ridge length
- Size: 300mm x 3000mm
- Colour: Black
- MPN: GDRR-3M-BL
The Manthorpe 3m Roll-Out Dry Ridge System is a complete kit for mechanically securing ridge tiles to a roof while shielding them from rain penetration and wind uplift. This convenient secure system is compatible with most makes of concrete half-round and angled ridge tiles, plus most slate, flat concrete and profiled roof tiles. It can be fitted to the ridge of any duo pitch roof with a pitch between 15 and 45 degrees.
The system requires no messy mortar application and can be installed all year round in all weathers. Once fitted, the Roll-Out Dry Ridge System provides 5,000mm²/m ventilation to the roof void through the vent roll, equating to a continuous 5mm gap. This box provides all the components required for approximately 3 metres of ridge (excluding the ridge tiles).