Manthorpe Roll-Out Dry Ridge Tile Roofing System Black 3m - GDRR-3M-BL

In stock
REF
RVEN314
  • Quick and easy to fix, with no special tool requirements
  • Compatible with a variety of roof and ridge tiles
  • Kit contents: 1 vent roll, 5 batten support brackets, 7 ridge unions
  • Does not require mortar
  • Can be installed in all weathers
  • Provides 5,000mm²/m of ventilation into the roof space
  • Single person installation
  • Fully compliant to the requirements of BS 8612
  • One box supplies enough components for a 3m ridge length
  • Size: 300mm x 3000mm
  • Colour: Black
  • MPN: GDRR-3M-BL
£48.82 £40.68
Share on Social Media
  • Quick and easy to fix, with no special tool requirements
  • Compatible with a variety of roof and ridge tiles
  • Kit contents: 1 vent roll, 5 batten support brackets, 7 ridge unions
  • Does not require mortar
  • Can be installed in all weathers
  • Provides 5,000mm²/m of ventilation into the roof space
  • Single person installation
  • Fully compliant to the requirements of BS 8612
  • One box supplies enough components for a 3m ridge length
  • Size: 300mm x 3000mm
  • Colour: Black
  • MPN: GDRR-3M-BL

The Manthorpe 3m Roll-Out Dry Ridge System is a complete kit for mechanically securing ridge tiles to a roof while shielding them from rain penetration and wind uplift. This convenient secure system is compatible with most makes of concrete half-round and angled ridge tiles, plus most slate, flat concrete and profiled roof tiles. It can be fitted to the ridge of any duo pitch roof with a pitch between 15 and 45 degrees.

The system requires no messy mortar application and can be installed all year round in all weathers. Once fitted, the Roll-Out Dry Ridge System provides 5,000mm²/m ventilation to the roof void through the vent roll, equating to a continuous 5mm gap. This box provides all the components required for approximately 3 metres of ridge (excluding the ridge tiles).