Plastic Pipe Fittings

• To be used when connecting Speefit pipe to a Speedfit fitting.
• The 2 extra 'O' Rings provide enhanced sealing. 
• Superseal Pipe Insert 15mm STS15

JG Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding.  

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection

• To be used when connecting Speefit pipe to a Speedfit fitting
• The 2 extra 'O' Rings provide enhanced sealing
• Superseal Pipe Insert 22mm STS22

• To be used when connecting Speefit pipe to a Speedfit fitting.
• The 2 extra 'O' Rings provide enhanced sealing. 
• Superseal Pipe Insert 10mm STS10

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and seal connection

• *Single unit* image is for display purposes only
• Not suitable for central heating systems
• Push-fit & demountable connections

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection

• Automatically vents trapped air from within a sealed heating system
• Made from high-quality brass & heat-resistant polypropylene to provide long life and durability
• Speedfit 15mm push-fit connection compatible with JG Speedfit fittings

• Not suitable for central heating systems
• Push-fit & demountable connections
• Lead-free & non-toxic

• Designed, manufactured & assembled in UK by John Guest Speedfit
• Simply push the fitting fully onto the pipe & twist the plastic nut clockwise to lock in place
• Suitable for hot & cold water & central heating systems

• Push-fit & demountable connections
• Suitable for hot & cold water & central heating systems
• Grip & Seal connection

• Push-fit & demountable connections
• WRAS approved
• 6 Bar at 65 deg

• Dimensions: 28x22x22mm
• HEP2O Reduced Double End Tee

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection

• No tools required
• Push-fit and demountable connections
• Suitable for hot and cold water, central heating systems and plastic and copper pipe

• No tools needed 
• Push-fit and demountable connections 
• Suitable for hot and cold water central heating systems and plastic and copper pipe 

• Push-fit and demountable connections
• Suitable for hot and cold water
• Central heating systems and plastic and copper pipe grip and seal connection

• Suitable for central heating systems,
• Connects imperial to metric pipe,
• No tools required,

• Not suitable for central heating systems
• Push-fit & demountable connections
• Lead-free & non-toxic

• Fast & simple to install & is easy to use in confined spaces, no tools required
• Not suitable for central heating systems
• Blanking plug supplied with each manifold

• Push-fit & demountable connections
• Suitable for hot & cold water & central heating systems
• Grip & Seal connection

• Push-fit & demountable connections
• Suitable for hot & cold water & central heating systems
• Grip & seal connection

• Push-fit & demountable connections
• Suitable for hot & cold water & central heating systems
• Grip & seal connection

• Suitable for domestic hot & cold water
• Very flexible
• Removes the need for small pipe runs with lots of joints

• Push-fit & demountable connections
• Suitable for hot & cold water & central heating systems
• Grip & seal connection

• WRAS Approved
• JG Speedfit
• 312 Compact PRV

 

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection

JG Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding.