Manthorpe Roll-Out Dry Hip Tile Roofing System 6m - GDRH-BL

In stock
REF
RVEN310
  • Quick and easy to fix, with no special tool requirements
  • Compatible with a variety of roof and hip tiles
  • Kit contents: 1 vent roll, 6 support trays, 13 hip unions
  • Does not require mortar
  • Can be installed in all weathers
  • Provides 5,000mm²/m of ventilation into the roof space
  • Single person installation
  • Fully compliant to the requirements of BS 8612
  • One box supplies enough components for a 6m hip length
  • Support tray length: 1100mm
  • Size: 300mm x 6000mm
  • Colour: Black
  • MPN: GDRH-BL
£97.92 £81.60
Share on Social Media
  • Quick and easy to fix, with no special tool requirements
  • Compatible with a variety of roof and hip tiles
  • Kit contents: 1 vent roll, 6 support trays, 13 hip unions
  • Does not require mortar
  • Can be installed in all weathers
  • Provides 5,000mm²/m of ventilation into the roof space
  • Single person installation
  • Fully compliant to the requirements of BS 8612
  • One box supplies enough components for a 6m hip length
  • Support tray length: 1100mm
  • Size: 300mm x 6000mm
  • Colour: Black
  • MPN: GDRH-BL

The Manthorpe 6m Roll-Out Dry Hip System is a complete kit for mechanically securing hip tiles to a roof while shielding them from rain penetration and wind uplift. This convenient secure system is compatible with most makes of concrete and clay half-round and angled hip tiles, plus most slate, flat concrete and profiled roof tiles.

The system requires no messy mortar application and can be installed all year round in all weathers. Once fitted, the Roll-Out Dry Hip System provides 5,000mm²/m ventilation to the roof void through the vent roll, equating to a continuous 5mm gap. This box provides all the components required for approximately 6 metres of hip length.