Joint Tec Brush-In Jointing Compound - Pitch Black 15kg

Out of stock
REF
BCHE183

Sorry this product is out of stock - please contact us for alternatives and lead times.

  • Available in colours: golden granitegranite greybasalt greypitch black 
  • Ready to use, no mixing required
  • Fast and easy brush in application
  • Highly water permeable
  • Suitable for joints over 5mm wide and 20mm deep
  • Can be applied in all weather conditions
  • Weed and frost resistant
  • View more jointing compounds here
£32.14 £26.78
Share on Social Media
  • Available in colours: golden granitegranite greybasalt greypitch black 
  • Ready to use, no mixing required
  • Fast and easy brush in application
  • Highly water permeable
  • Suitable for joints over 5mm wide and 20mm deep
  • Can be applied in all weather conditions
  • Weed and frost resistant
  • View more jointing compounds here

Joint Tec is ready to use, brush-in, pavement jointing compound. A quick and simple alternative to grout for landscaping projects. Suitable for pavement slabs, flags, natural stone, cobbles, and setts. The brush-in paving compound is water permeable, sets hard, and doesn't wash out. Best for joints with a minimum depth of 20mm and 5mm wide. Apply in all weather conditions, even in the rain.

Application:

  • Prep joints - ensure joints are clean, free from debris
  • Wet area - thoroughly saturate with water prior to spreading Joint Tec. On a dry day keep re wetting the area if it is drying out.
  • Apply product - pour Joint Tec onto areas to be pointed. Use in small manageable amounts.
  • Work into joints – use a stiff brush or squeegee brush Joint Tec into all joints, ensuring all joints are filled and compacted.
  • Wash continuously - hose on sprinkle, add more water to help residual compound flow into the joints of the paving and to aid the final compaction process.
  • Final wash and clean - gently spray the surface to wash off any Joint Tec residue. Sweep with a clean brush diagonally across joint to remove any loose grains.
  • Smooth joints - ‘strike’ or ‘point’ the surface of the joints with a suitable pointing tool.

For best results:

  • Ensure site is free draining
  • Paved area should have a slight fall for drainage purposes
  • Bedding and sub-base should be permeable
  • Where a mortar bedding is used it should be no stronger than 6 parts sand to 1 part cement
  • Some natural stone materials, due to their porous nature are more susceptible to staining, continuously use water during the process to avoid
  • Carry out a small sample to ensure you are happy with the colour of the product
  • Store in cool dry conditions, once opened use within 1 hour or store in bucket immersed in water for up to 1 month
  • In lower temperatures it will take longer to harden. In warm and dry conditions curing will take approx. 18 to 24 hours