We use cookies to make your experience better. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience. To comply with the new e-Privacy directive we need to ask for your consent to set non-essential cookies. If you do not give permission you may continue to use this site and only essential cookies will be set. Learn more.
Everbuild 503 SBR Bond 5L
In stock
REF
BCHE431
- Greatly improved adhesion to a wide range of substrates including dense concrete, steel, tiles etc.
- Mixes may be applied in much thinner sections
- Ensures water/water vapour resistance
- Prevents salt formation
- Improves toughness and flexibility
- Reduces surface dusting of concrete
- Improves resistance to many chemicals- ideal for use in dairy parlours etc.
- Reduced water:cement ratio for equivalent workability
- Improved frost resistance
- SBR Bond is also freeze thaw stable.
ÂŁ19.78
ÂŁ16.48
- Greatly improved adhesion to a wide range of substrates including dense concrete, steel, tiles etc.
- Mixes may be applied in much thinner sections
- Ensures water/water vapour resistance
- Prevents salt formation
- Improves toughness and flexibility
- Reduces surface dusting of concrete
- Improves resistance to many chemicals- ideal for use in dairy parlours etc.
- Reduced water:cement ratio for equivalent workability
- Improved frost resistance
- SBR Bond is also freeze thaw stable.
Everbuild’s SBR Bond is a multi-purpose admixture, primer, bonding agent and sealer.
Areas For Use
- As an admixture for mortar/screeds/renders.
- As a bonding agent for screeds/renders.
- As a primer/sealer in tiling applications.
- As a flexibliser for cementicious based tile adhesive when tiling on wooden/asphalt floors.
In addition, SBR Bond has the advantage over PVA bonding aids in that it is not adversely affected in wet conditions and is therefore recommended for exterior use.
MIX DESIGN
The mix design depends upon thickness and intended use. However, typically mixes for a 12mm topping or screed are as follows:-
- Screed Topping
- O.P.C 1 1
- Moist Sand 3.5 1.75
- 3mm Washed Granite 0 1.75
- SBR Bond 0.2 0.2 (ie 10 litres per 50kg bag of cement)
- Water As required
- All parts are by volume of uncompacted material.
COVERAGE RATE
- As a rough guide, 1.2 litres of SBR BOND will cover 1m² of 12mm thickness using the above mixes.