Everbuild 201 Mortar Admix 5L

In stock
REF
BCHE403
  • Improves workability 
  • Outperforms traditional Vinsol Resin Based plasticisers 
  • Air entraining liquid plasticising admixture 
  • Easier tamping down and alignment 
  • Provides resistance to freeze/thaw cycling down to -2oC. 
  • Chloride free (chloride ion content <0.1%) 
  • Reduces bleeding and salt formation 
  • Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence 
  • Usage: Using at an addition rate of 125 – 250cc per 50kg cement 
  • Conforms to BSEN934- Part 3 
£10.13 £8.44
Share on Social Media
  • Improves workability 
  • Outperforms traditional Vinsol Resin Based plasticisers 
  • Air entraining liquid plasticising admixture 
  • Easier tamping down and alignment 
  • Provides resistance to freeze/thaw cycling down to -2oC. 
  • Chloride free (chloride ion content <0.1%) 
  • Reduces bleeding and salt formation 
  • Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence 
  • Usage: Using at an addition rate of 125 – 250cc per 50kg cement 
  • Conforms to BSEN934- Part 3 

Everbuild’s Mortar Admix has been designed to improve the workability of mortar mixes by forming air bubbles inside the substrate, giving it a ‘buttery’ texture. Admix also protects the mortar from the freeze/thaw cycle in the long term. Replacing Lime in the process, using this admixture will improve the consistency of separate batches of sand and cement. Areas for use: Load bearing brickwork, Block laying, External/Internal rendering, Pointing/repointing brickwork.

Ratios:

BRICKLAYING/POINTING Use a mix design appropriate to brick strength (1 : 3 to 1 : 6).

INTERNAL RENDERS 1 : 6 + MORTAR ADMIX

EXTERNAL RENDERS 1 : 3 + MORTAR ADMIX