Building Chemicals

• Waterproofs bathroom areas ready for wet room installation 
• All components contained in 1 kit 
• Coverage: 7.5m2 

• Waterproofs bathroom areas ready for wet room installation 
• All components contained in 1 kit. 
• Coverage: 4.5m2 Kit contains 

• Repairs tarmac on roads and paths. 
• Ready to use cold lay product 
• Fill and compact down 

• Permanent lightfast colours 
• Dispenses easily in dry mix 
• Does not impair performance of mix 

• Coverage: 1L will cover approx 5-10m2 depending on the nature of the surface.
• Powerful, fungicidal wash
• Used to remove lichens, fungi and algae from walls, paths, roofs, drives and more

• Enhanced flow properties coupled with long open time giving easy trowelling. 
• Fast setting - sets in 8 hours. 
• Up to 6mm in depth in one coat. 

• Protects tarmac from weathering, oil and petrol spills and unsightly plant/weed growth 
• Tough, durable, low sheen finish 
• Breathes new life in to old tarmac 

• Internal and external use. 
• Fast acting. 
• Leaves a residual surface to prevent further dusting. 

• Permanent lightfast colours 
• Dispenses easily in dry mix 
• Does not impair performance of mix 

• Cleans mortar, cement, ingrained dirt and most paint from mineral surfaces 
• 18% strength 
• Water clean-up 

• For levelling uneven subfloors prior to covering/tiling 
• Enhanced flow properties coupled with long open time giving easy trowelling. 
• Fast setting - sets in 8 hours. 

• Excellent for pebble dashing or roughcasting or harling finishes
• High-strength liquid mixture
• Chloride-free

• Stabilises and binds interior and exterior friable surfaces prior to overcoating
• Seal and bonds together chalky, dirty and weathered surfaces
• leaves stable base for overpainting with most paints

• Reduces surface absorption 
• Reduces permeability of concrete and mortar mixes 
• Increases compressive strength

• Greatly improved adhesion to a wide range of substrates including dense concrete, steel, tiles etc. 
• Mixes may be applied in much thinner sections 
• Ensures water/water vapour resistance 

• Numerous applications in the building industry from one product; adhesive, sealer, bonding agent and cement admixture 
• Economical and simple to use. 
• Exceptional adhesive properties.

• Slow setting time makes it ideal for covering large areas in a single application.
• Reduces water penetration without acting as a vapour barrier
• Creates smooth, easy to work with mortar

• A general purpose mortar in a bucket 
• Just add water and mix 
• For brick or block laying. Rendering and pointing. Masonry repairs.

• Primer and Sealer • Can be used as a Cement Admixture • Water Based Product/Water Clean Up • Overpaintable when cured • Fully conforms to BS5270

• Greatly improved adhesion to a wide range of substrates including dense concrete, glass, steel, tiles etc. 
• Mixes may be applied in much thinner sections resistance to salt permeation. 
• Reduced surface dusting of concrete

• Improves water resistance of mortars 
• Concentrated formula 1ltr = 25ltrs of standard 3 in 1 Additives 
• Easy-to-use gauged bottle 

• Water Based Product/Water Clean Up 
• Air Entraining Plasticiser
• Water Reducing

• Improves workability 
• Outperforms traditional Vinsol Resin Based plasticisers 
• Air entraining liquid plasticising admixture 

• Overpaintable when cured
• External and Internal Use

"Everbuild Cemstrip is a new type of cement, concrete and mortar stain remover that provides a more environmentally friendly and safer alternative to conventional hydrochloric acid based cement removers. Cemstrip will also remove salts and efflorescence from the surface of mineral substrates and is a very effective general cleaner for removing ingrained dirt, grease and stains from paths and patios. Cemstrip is a highly concentrated formula that can be diluted by up to 10 times with water to suit a variety of applications. Unlike hydrochloric acid based products, Cemstrip can be safely used on most metal surfaces such as tools, cement mixers and other building equipment. Cemstrip is Non-hazardous in storage, transport and usage. It is also fully biodegradable."

• Forms an extremely durable waterproof coating for concrete and masonry
• Can be applied using a stiff hand brush, broom or spray
• Ideal permanent waterproofing system for basements, cellars, pools and reservoirs

• Easy mix twin bag system
• Styrene free for low odour
• apply using standard sealant gun

• Bio-degradable
• Safe formula 
• Works on walls, paths and patios

• Forms an impervious water and water vapour barrier on most surfaces 
• Internal or external use 
• May also be used as an adhesive or bonding aid 

• Biodegradable & safe formula 
• Works on walls, paths and patios
• Pour, spray or brush on